630-735-3500
Enpac LLC
Plug N Dike - Low-Temp Premix Paste - 8 (1 lb.) Jars Per Case
SKU#: BP921
Plug N Dike 1 lb. Low‑Temp Premix Paste is a ready‑to‑use emergency leak‑stopping compound that instantly adheres to drums, totes, and fuel tanks during hazardous material spills.
Looking for a quote? Simply add your items to the cart and choose Request for Quote during checkout.
Enter a value between 1 and 100000000 in increments of 1.
Earn Darley Dollars with this purchase
Features
- Instant Adhesion: Instantly sticks to drums, totes, and fuel tanks
- Temporary Patch: Designed for use as a temporary leak‑stopping solution
- Low‑Temperature Performance: Works in cold conditions down to 5°F (‑15°C)
- Chemical Resistance: Bentonite glycol mix provides resistance for fuel leaks
- No Surface Preparation: Adheres to dirty, greasy, or rusty surfaces
- Ready to Use: Premixed paste requires no mixing or tools
- Fuel‑Focused Use: Primarily used for fuels and non‑miscible solvents
What is it?
Plug N Dike Low‑Temp Premix Paste is a pre‑mixed leak control compound designed to stop leaks during emergency hazardous material spills by sealing openings on containers and tanks.
How is it used?
The premix paste is applied directly to the leak area, where it adheres on contact to stop or reduce leaks during emergency spill situations. No surface preparation is required prior to application.
Who uses it?
This product is used by First Responders, emergency response teams, hazmat crews, and personnel responsible for managing fuel and hazardous material spill incidents.
What is it used with?
Plug N Dike Low‑Temp Premix Paste is used as part of spill response and leak control operations and may be deployed alongside other hazardous material containment and spill mitigation equipment.
What material is it made from?
- Bentonite
- Glycol
Maintenance Information
Store the container sealed when not in use. Inspect the paste before deployment to ensure it remains usable. Keep within the listed temperature range for proper performance.
How to Use – Plug N Dike Low‑Temp Premix Paste
- No surface preparation is necessary. The paste may be applied even if the surface is dirty or fluid is flowing over the leak.
- Put on protective gloves before handling the material.
- Take a handful of Plug N Dike premix paste and apply it directly into and around the edges of the leak.
- Work the paste and press it down firmly to achieve good adhesion to the surface.
- Apply enough material to create a thick layer over the leak area. Additional paste may be added on top if needed.
- The premix is ready to use immediately and requires no mixing or curing time.
- The paste functions as a temporary leak‑stopping solution.
Important Use Limitations
- Not recommended for use on containers of antifreeze, acids, caustics, or oxidizers.
- Intended for temporary leak control during emergency spill situations.
- Designed for use on metal drums, fuel tanks, and similar containers.
What’s Included?
- Model 1‑PMPA‑8: (8) 1 lb jars of low‑temp premix paste per case
- Product Type: Low‑temperature premix paste
- Weight (Per Jar): 1 lb (0.4 kg)
- Diameter (Per Jar): 3.5 in (8.8 cm)
- Height (Per Jar): 2.75 in (6.9 cm)
- Material: Bentonite, Glycol
- Temperature Range: 5°F to 150°F (‑15°C to 66°C)
- Recommended Use: Fuels and non‑miscible solvents
- Not Recommended For: Antifreeze, acids, caustics, or oxidizers
- Model: 1‑PMPA-8