630-735-3500
Savox Communications Inc
HC-1 Helmet-COM - IP56 - with Coiled Cable and QR4, Long or Short Mic
Savox HC‑1 Helmet‑COM®—a bone‑conduction, IP56 helmet headset with QR4 quick‑release and coiled, flame‑retardant cable. Choose Short (L52000) or Long (L52005) mic arm for a custom fit. Compatible with Savox C‑C440/C‑C550 control units and MSA Gallet adapters for clear, hands‑free fireground comms.
Looking for a quote? Simply add your items to the cart and choose Request for Quote during checkout.
Enter a value between 1 and 100000000 in increments of 1.
Earn Darley Dollars with this purchase
Experience Unmatched Communication and Durability with the HC-1 Helmet-COM
Introducing the HC-1 Helmet-COM, the ultimate communication solution designed for professionals who demand reliability and performance in the toughest environments. Engineered with an IP56 rating, this helmet communication system is built to withstand dust, water, and extreme conditions, ensuring you stay connected no matter where your mission takes you.
Features
- Bone‑conduction mic: Captures speech through skull vibrations; works with or without facemasks; stays clean and protected inside the shell.
- IP56 protection: Dust‑ and water‑resistant for fireground conditions.
- Helmet‑universal mount: Fastening strap mounts to most helmet types; MSA Gallet adapters included. Left or right side wearable.
- Quick‑release connector: QR4 4‑pole plug for rapid donning/doffing and reliable connection to Savox control units.
- Two mic‑arm lengths: L52000 (Short), L52005 (Long) to match helmet geometry and user preference.
- Fire‑service ready: Flame‑retardant PUR coiled cable, compact, lightweight, and radiocomm compatible via Savox PTT/RSM
What is it?
The Savox HC‑1 Helmet‑COM® is a compact, bone‑conduction helmet headset engineered for fireground and hazardous environments, providing clear, hands‑free communications while fitting inside most fire helmets. The bone‑conduction microphone sits inside the helmet to capture speech via skull vibrations, so it works with or without a face mask and avoids the contamination and snag risks of a boom mic. Rated IP56 for dust/water resistance.
Who uses it?
Designed for First Responders—firefighters, technical rescue, wildland/brush, USAR, and EMS—who need hands‑free, helmet‑integrated communications that remain clear under PPE and SCBA. Fire and emergency services have used HC‑1 solutions for over two decades.
How is it used?
- Mount in minutes using the universal fastening strap; the low‑profile single speaker positions over the ear under the helmet liner.
- Connect the QR4 (4‑pole) quick‑release to a Savox PTT or RSM (e.g., C‑C440 push‑to‑talk or C‑C550 remote speaker mic) for radio comms.
- Choose your preferred mic arm length (Short L52000 or Long L52005) for best placement and fit inside your specific helmet.
What is it used with?
- Savox control units: C‑C440 PTT and C‑C550 RSM (examples of compatible interfaces).
- Fire helmets: Fits most major models; MSA Gallet adapters provided.
- Two‑way radios: Through the connected Savox PTT/RSM and appropriate radio interface cable.
What material is it made from?
Savox specifies a flame‑retardant PUR coiled cable (Ø ~4 mm), with QR4 4‑pole male quick‑release connector; materials used meet UL94‑V0 flammability classes in the datasheet’s compliance section.
Common to both L52000 & L52005 (unless noted):
- Ingress protection: IP56.
- Microphone: Bone‑conduction (vibration‑sensitive), impedance ~6.5 kΩ @ 1 kHz (datasheet). (Some reseller sheets cite ~3.5 kΩ for legacy HC‑1 versions.)
- Speaker: 32 Ω @ 1 kHz (±15%); 0.2 W nominal, 0.5 W max; 81 dB ±3 dB @ 0.2 W/0.5 m; THD typically <5%.
- Connector: QR4 (4‑pole) quick‑release male.
- Cable (coiled): 305 mm not extended, Ø 4 mm, PUR flame‑retardant; tensile strength up to 50 N
- Environmental: Operating −25 °C to +85 °C (temporary to +120 °C); Storage −25 °C to +85 °C; humidity endurance per datasheet; materials to UL94‑V0.
HC‑1 L52000 (Short Mic Arm)
- Mic arm length: ~180 mm.
- Weight: ~88 g (with arm & strap) / 78 g (without). (Some regional product cards list ~81–85 g.)
HC‑1 L52005 (Long Mic Arm)
- Mic arm length: ~240 mm for extended placement options in different helmet shells.
- Weight: ~83 g (with arm & strap) / 73 g (without).
Additional Specifications
- Bone-conductive, dirt protected microphone
- Quick-release connector
- Especially suitable for fire and rescue tasks
- Unique fastening-strap system fits all helmets
- Mounts without any tools Light and compact
- Adapts to Savox C-C400/C-C500 com-control units
- Weight: 85g
- Size: 40 x 160mm
- Microphone: Vibration-sensitive, impedance approx. 3500 Ohm @ 1 khz
- Speaker Impedance: 32 Ohm
- Cable, Coiled (flame-retardant): 4mm Dia/380mm
- Cable, Straight (flashover-proof): 4mm Dia/750mm
- Connector: 4-pole quick-release connector
- Operating Temperature: -25 to +85°C (continuous)
- Storage Temperature: -25 to +63°C
- Humidity 95% RH, 63°C for 500 hours