Female Pipe Tee - .25"

Features

• Material (Forged Brass): Made from forged brass for high strength, machinability, and corrosion resistance—ideal for rugged service.
• Thread Standard: All three ports are 0.25‑18 NPT female (FNPT) for reliable tapered‑thread sealing with standard sealant (PTFE tape or compound)
• Form Factor (Tee): Three‑way tee enables branching of flow paths in compressed air, water, hydraulic oil, and utility gas lines (per general brass tee applications).
• Durability: Brass resists rust and general corrosion; forged construction provides robust, pressure‑rated performance for field use.
• Compact & Service‑Ready: 60 g unit weight supports compact installs in tight enclosures or manifold panels.

What is it?

A forged‑brass, female‑threaded tee that splits or combines three flow paths using 0.25‑18 NPT tapered internal threads on every port. Brass tees are widely used where dependable, pressure‑tight branch connections are needed in fluid and pneumatic systems

How is it used?

Thread the tee into existing 0.25‑18 NPT male piping or hose ends to create a branch run. Because NPT is a tapered thread form, apply PTFE tape or thread sealant and tighten to achieve a leak‑tight seal. NPT usage and sealing practice are defined by ASME/ANSI B1.20.1 for general‑purpose tapered pipe threads.

Who uses it?

• Fire apparatus upfitters and EVT teams adding gauge lines, pump panel air lines, or utility connections.
• EMS fleet maintenance for on‑board air systems and equipment manifolds.
• Public safety facilities for station air, water, or fuel system branch connections.

Maintenance information

• Periodically inspect for thread weeping; re‑seal and re‑torque as needed.
• Avoid over‑torque to protect tapered threads.
• Keep threads clean and free of debris before assembly; use fresh PTFE tape or pipe dope per shop practice.

What is it used with?

• 0.25‑18 NPT male pipe nipples, valves, gauges, regulators, and quick‑disconnects following ASME/ANSI B1.20.1.
• Common media: compressed air, water, hydraulic oil, and utility gas (per typical brass tee listings; verify compatibility with your media and local codes).

What material is it made from?

Brass forging (commonly comparable to forging‑brass alloys used for fittings). Forged brass is selected for strength, machinability, and corrosion resistance in fluid handling components

Why brass (forged) fits First Responder needs

Forged brass fittings provide robust, repeatable sealing, and corrosion resistance for vehicle and station systems subjected to weather, vibration, and frequent maintenance—key for uptime in emergency operations

Installation Tips (NPT best practice):

Use PTFE tape or pipe sealant on 0.25‑18 NPT male threads; tighten for a leak‑tight and vibration‑resistant joint as defined by ASME/ANSI B1.20.1 tapered threads.

Material Insight (Forged Brass):

Forging improves grain flow and mechanical properties; brass forgings are widely used for safety‑critical fluid components (valves, fittings) in severe service