SENSIT Calibration Gas Kit for the HXG-3, 2.5% CH4, 21L

Features

• Precision Calibration: Ensures accurate readings for combustible gas detection
• High Compatibility: Designed for the SENSIT HXG-3 detector
• Durable Components: Industrial-grade regulator and hose assembly
• Portable Design: Compact and easy to transport to job sites
• Multiple Calibrations: Supports up to 40 calibration cycles
• Safety Compliant: NIST traceable gases and compliant with safety standards

What is it?

The SENSIT 881-00015 Calibration Gas Kit is a precision calibration solution designed specifically for the SENSIT HXG-3 Combustible Gas Leak Detector. It contains a non-refillable 21-liter cylinder filled with 2.5% methane (CH₄) in air, along with a flow regulator and hose assembly.

How is it used?

This kit is used to calibrate gas detection instruments to ensure accurate readings and safe operation. Simply connect the regulator and hose to the HXG-3 detector and follow the manufacturer’s calibration procedure. Each kit supports approximately 30 to 40 calibrations, making it ideal for routine maintenance and compliance checks.

Who uses it?

Professionals in fire safety, hazmat response, industrial maintenance, and gas utility services rely on this kit to maintain the accuracy of their gas detection equipment. It’s essential for technicians who perform combustible gas leak detection in hazardous environments.

Maintenance information

While the kit itself requires minimal maintenance, users should store the cylinder in a cool, dry place, inspect the regulator and hose for wear before each use, replace the kit once the gas supply is depleted, and follow all safety and handling instructions provided by SENSIT Technologies.

What is it used with?

This calibration kit is exclusively compatible with the SENSIT HXG-3 Combustible Gas Leak Detector. It may also be suitable for other detectors requiring 2.5% methane calibration gas, but always verify compatibility with the manufacturer.

What material is it made from?

Cylinder: Lightweight aluminum or steel (non-refillable)

Regulator & Hose: Industrial-grade materials designed for safe gas flow and durability

How to Use the SENSIT Calibration Gas Kit with HXG-3

Always read safety sheets and owner's manual for exact directions and information

Prepare the Equipment

• Ensure the HXG-3 gas detector is fully charged or has fresh batteries.
• Gather the calibration gas kit: 21L cylinder with 2.5% methane (CH₄) in air, flow regulator, and hose assembly.

Connect the Regulator

• Attach the flow regulator to the calibration gas cylinder.
• Connect the hose from the regulator to the calibration port on the HXG-3 detector.

Power On the Detector

• Turn on the HXG-3 and allow it to stabilize in clean air for a few minutes.

Initiate Calibration Mode

• Access the calibration mode on the HXG-3 (typically via menu settings or a calibration button).
• Follow on-screen prompts or refer to the HXG-3 user manual for specific steps.

Apply Calibration Gas

• Open the regulator valve to release the calibration gas at the recommended flow rate (usually around 0.5 L/min).
• Allow the gas to flow for the duration specified in the HXG-3 manual (commonly 2–3 minutes).

Complete Calibration

• The detector will adjust its sensor readings to match the known concentration of the calibration gas.
• Once calibration is complete, close the regulator valve and disconnect the hose.

Verify Calibration

• Test the detector in clean air and with a known gas source to confirm accuracy.

Record Calibration

• Log the calibration date, gas concentration, and detector response for compliance and maintenance records.

What's Included in the SENSIT 881-00015 Calibration Gas Kit

• Calibration Gas Cylinder: 21-liter non-refillable cylinder containing 2.5% methane (CH₄) in air
• Flow Regulator: Designed to deliver a consistent flow rate suitable for calibration
• Hose Assembly: Connects the regulator to the gas detector (HXG-3)
• Instruction Sheet or Manual: Basic usage and safety guidelines

This kit is designed to support approximately 30–40 calibrations, depending on flow rate and duration per use.