Features

• Vertical or Horizontal Mounting: Can be mounted vertically or horizontally to accommodate different storage needs.
• Designed for Various Tools: Suitable for 2-to-16-pound double face sledges and 1-to-3-pound dead blow hammers.
• Expandable Design: Bracket dimensions are 2-3/4" H x 3" W, expandable from 5-1/2" to 7-3/4" L to fit various sized tools.
• Stainless Steel Construction: Made from high-quality stainless steel for years of dependable service.
• Neoprene Base Pad: Tool rests upon a neoprene base pad for added protection.
• Locking Pin: Secures tool handle to prevent dislodging.
• NFPA Compliant: Meets NFPA standards and third-party tested to exceed the 11G standard.

How is it used?

To use the QUIC-MOUNT® Sledge Hammer Bracket, follow these steps:

Wall Mounting:

1. Position the sliding toe clamp at the top of the bracket.
2. Place the triangular mount plate on the wall and mark the mounting holes.
3. Drill and tap the marked holes into the beam with a 1/4-20 thread.
4. Bolt the mount plate to the wall using the provided1/4-20 bolts and flat washers.
5. Fasten the helmet bracket to the mount plate using the provided 1/4-20 Nyloc nuts and flat washers.

Ceiling Mounting:

1. Ensure the sliding toe clamp is positioned correctly (not facing the front of the truck).
2. Place the triangular mount plate on the ceiling and mark the mounting holes.
3. Drill and tap the marked holes into the beam with a 1/4-20 thread.
4. Bolt the mount plate to the ceiling using the provided 1/4-20 bolts.
5. Fasten the helmet bracket to the mount plate using the provided 1/4-20 Nyloc nuts and flat washers.

Tool Mounting:

1. Place the tool upon the neoprene base pad.
2. Secure the tool handle with the locking pin to prevent dislodging.

Who uses it?

This bracket is used by firefighters, emergency responders, and rescue personnel who need a reliable solution for storing their sledge hammers and dead blow hammers. It is particularly useful in fire trucks, rescue vehicles, and emergency response units 

Maintenance Information

To ensure optimal performance, regular maintenance is recommended:

• Inspection: Check for signs of wear, damage, or corrosion before and after each use.
• Cleaning: Clean the bracket with mild soap and water to remove any debris.
• Lubrication: Apply a suitable lubricant to the mounting hardware to maintain smooth operation.
• Storage: Store in a dry, cool place to prevent corrosion and damage.

What is it used with?

The QUIC-MOUNT® Sledge Hammer Bracket is compatible with various tools, including:

• 2 to 16 pound double face sledges
• 1 to 3 pound dead blow hammers

Material

This bracket is constructed from high-quality stainless steel, ensuring durability and resistance to wear and tear. The neoprene base pad provides additional protection for the tools